thanks for the help. The hood has cracks all over it, and that is the only panel that is like that. I tested panels on the car with laquer, and i tested the hood, the paint on the hood pretty much wipes off with the laquer. I dont think the rest of the car is a urythane either. Right now I am long blocking everything with 80 grit so i can see where the body work needs to be done, I will fill the areas that need it, then spray about 3-4 coats of polyester primer, sand with 80 and 120, then re-prime with a normal 2k primer (k36), and final sand that for sealer. The car is in really good shape, there has been some body work done on it which is someone rough, so that need to be straightened out as well as some other dents. The biggest thing I was concerned about with the project is painting over whatever is on the car now. Again, I really appreciate the help!