Thread: Spray can paint..

Tweet

Thanks for the kind words. I would love to do a nice coat of semi-gloss myself. I have a pretty large compressor, but would not even know where to begin. I know I have to do magical things involving primer, thinner, strainers, etc. But it is beyond me

What I am trying to do right now is to find somebody locally woho would be willing to barter a paint job with me. Until then, the can primer looks very uneven.

i though the same way years ago but with pratice on the wall of the garage then pieces of steel, just try centri acryl over lap by half and watch the edge of the spray pattern were it flows together, start at the bottom of the panel and work up and start at a seam( door) and work your way back to it.centri is the hardest paint i have seen that resest runs you can blast it on ,try it.

Originally Posted by terrylittlejohn

i though the same way years ago but with pratice on the wall of the garage then pieces of steel, just try centri acryl over lap by half and watch the edge of the spray pattern were it flows together, start at the bottom of the panel and work up and start at a seam( door) and work your way back to it.centri is the hardest paint i have seen that resest runs you can blast it on ,try it.

Uhm... my cats name is mittens