Thread: Fiberglass Fenders

Tweet

Im prepping for primer and need to know will filler primer take out the waves if i keep going over it sanding and shooting it multiple times

If they aren't TOO deep. If the fenders are very thick, you might run over them with a sander first, and knock down the high spots.

what grit paper should i use

Hard to answer w/o seeing them......but if they are thick enuf, I'd start with 100 grit and take it slow..........it shouldnt take much, ot those fenders are junk.....should come out of a good mold with very little distortion.Then I like Ecklers spray putty for fine tuning the finish prior to painting.

I know that they came from BeeBops in Athens TN but they are good and thick. i think i will just test the waters and take it easy the wort thing that could happen is I buy a new Fender