Hey Guy's ,

I need some advise on Rust control, Primer/Prep. so I have a Question, I've been away from Painting for quite awhile, I'm envious of Ya'll out in the Southwest, here in Sunny Florida ( Sometimes ) the Humidity is beyond words, on certain days you can sand or sandblast a part and actually see the part start to rust. A paint rep told me some years back they ran tests and it took 4 Seconds for the rust to start. Question ; I'm getting close to putting my frame in primer ,I've been putting it off while I fabricate and weld on the numerous small brackets and mounting points for all of the little stuff that needs to be added. Just having a heck of a time contending with all of the Rust. I plan on using PPG Color ( Pearl Orange ) and would like to stay with their products throughout the project, I want the frame to Look as good as the body, ( 32 3 Window Highboy ) What Primer is recommended and do I use a Hi Build ? Epoxy ? or What ? Sand ,or Blast,Metal Prep/Rinse/Degrease/Dry& Prime ? If anyones seen the HotRods and Horse Power Deuce High-Boy Give Away Car for Good Guys .That is the color I'm looking for I was told it is an "03" Lamborgini " Orange Glow " would anyone know the Paint Code ? Thanks in advance for any replys
Thanks Tim