I plan on using all PPG products since there is a local distributor here in Saudi. I'll check on the Concept clear, although they only sell the european versions here, so it might not be available., or under a different name.

I've pretty much gotten my paints worked out, per recommendations of SprayTech. I was just needing to know the basic steps so I can make sure the guys don't take any short cuts.

Here, although you have many qualified craftsmen, they will take advantage of you and take shortcuts. I know paint can look good right after it's sprayed and last a year or two and then problems will occur due to poor prepping, etc.

I don't want that to happen, so I will give them stop points along the way so I can check their work. I will also be there helping throughout all the prep work until after sanding the hi-build primer level. As from my readings here and searches, everyone agrees that the prep work is the most critical aspect in getting a great paint job.

This is really what I'm after.

Thanks you all for your help and comments, and I'll try and find more oil to run your rods, but we're pumping a max capacity now.

Scott