Thread: shaving the body
-
04-25-2005 12:37 PM #1
shaving the body
is there any one out there that knows where i can get the cut
and shaped pices to shave the body of my 69 C-10
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-25-2005 01:50 PM #2
I think most people who do that make them out of sheetmetal and weld them in. Make cardboard templates first then trace them on to the metal and cut them out. Then they have to be shaped as needed and welded in.
PatOf course, that's just my opinion, I could be wrong!
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project