Originally posted by riotke207
Hey guys, I'm a rookie at the car game so take it easy on me. anyways, I have a 350 bored .30 with edelbrock e-tec 2.02 heads, dual plane performer rpm intake, edelbrock 600 cfm carb, edelbrock cam, 1.6 alum roller rockers. I had trouble starting it so I replaced the flexplate and added a high torque mini-starter. Now, my car starts great when I first start it up, but when I've been driving it for a while and shut if off it doesn't want to start back up again. When I turn the key it tries to start but acts as if its not getting enough gas. The carb also has an electric choke on it. ( I don't know if that matters.
I bought an msd6al ignition but haven't installed it. Would this help or does the problem lie elsewhere.

Any direction would be great at this point. Thanks guys!
the msd box may or may not help, but it sure wont hurt anything. make sure the choke betterfly is open all of the way after the motor gets hot. its hard to say, could be most anything. put the box on and make sure the choke is open when hot, then let me know whats going on . sounds like the carb. might be leaking down