Hello everyone,
I recently bought a 67 Camaro RS Ragtop.
Great shape,
Thinking of putting on the C26 Edelbrock Dual 4 setup on a 350CI
Any Comments?
Printable View
Hello everyone,
I recently bought a 67 Camaro RS Ragtop.
Great shape,
Thinking of putting on the C26 Edelbrock Dual 4 setup on a 350CI
Any Comments?
Just curious, why two fours? And welcome to CHR
Always wanted it. I will be driving this occasionaly on 100 mile runs it didn't want to put a blower on it.
It will be basically for show.
Welcome to the forum and the living nightmare of hotrodding, J/K.
good luck with the car. Post some pics if you go them
I had an early Vette dual quad setup on a 283 sb in a 36 Ford coupe back in the 60's. Carbs were wcfb's and flowed maybe 350 cfm apiece running a Duntov 350 horse 63 Vette cam. They really looked bitchin. In your case I'd run a couple of small Edlebrock's.
Yes, I'm running twin 500 cfm's edelbrocks.
They sell them all set up with the linkage and fuel lines attached.
Changing the cam and lifters and adding headers w/ flowmasters
I will post some pic's sometime this weekend.