As I recall the kit used the stock spindles and included the bearings that would work with those spindles and Chevelle rotors (it's been close to 30 years since I built it and 15 since I sold it).

With the springs and sway bars it was one of the best handling cars I've owned, especially for the size. I did replace the clam shell bushings....at the time original ones were not available, but I had a friend who was able to pour new polyurethane into the old steel shells and they worked like a champ.

I just remembered that one the 6 Cylinder cars that front sway bar was on option. The front lower control arms don't have the mounting points for the bar. The control arms are the same from 58-64 so if you come across one you might want to grab them.

The 6 Cylinders also had vacuum wipers as standard. If you don't already have electric wipers and want to convert, you will need not only the motor (which is 58 Chevy car only) the wiper arms, linkage and switch.

.