I actually have a walk out basement in my house, so that is where I am going to start. I started freeing things up tonight, one king pin is froze after sitting outside for 2 years with that spindle in the ground because the frmae was on its side. I can see someone before me tried with all the hammer maerks on it, it took a 4x4 block and a nice size hammer just to get it straight. I did get the other side apart and it will need bearing's.
Seems like I am going backwards by taking things back apart, but I need to get everything cleaned up, freed up, and start over.

Master will have to be replaced as it is very rusty and no plugs in the brake line holes