Thread: will not idle
Hybrid View
-
11-16-2004 02:51 PM #1
idle
Originally posted by moparfever
You may have to run it a little richer to get it to idle in gear. Try adjusting the mixture screws in gear.
Do you have the right port on the distrib to carb? I blew thru my Vac dampner on the carb and found it bad causing a massive vac leak..I would lean it out and back off on the timing a bit...chyrslers will run with too much timing advance or not enough.
Also you might try..cutting your distributor hold down stop out of the hold down. There is a built in advance limiter on the stock distributer hold down bracket..grind it out, for more distributer movement.provoking someone does not teach them anything.
I saw last night on fb about John. The world sure lost a great one. I'm going to miss his humor, advice, and perspective from another portion of the world. Rest in Peace Johnboy.
John Norton aka johnboy