Originally posted by Matt167
I got the master cyl today and it is the exzact same size shape and will bolt up but, the fitting locations are diffrent, the master that is on the car has both fittings on the side and the new has 1 on the side and 1 bottom front, should I just put this 1 in and rebend the lines or find the exzact 1. The guy at the local parts place ( Carquest ) I got it from only had 2 listings, 1 for a power brakes setup and 1 for manual brakes, I said manual brakes because there's no booster. Should I take this 1 back and go to another parts place such as Napa and get another to try for the same hookup as on the old? My dad said I should ask you guys.
if you can hook up the lines without to much trouble, go for it. if the line comes out the side or bottom makes no dif.