Thread: 351M transmissions?
-
08-22-2004 02:34 PM #1
351M transmissions?
OK, I just blew the motor in my RX-7, so I'm going to put a 351M in the car. I have the motor, but no transmission.
And I read somewere a while ago when I was searching on this motor, that it takes big block transmissions? Is this true? Or will a regular 351W/351C tranmission bellhousing bolt to the motor?
Also, were can I get a flywheel wheel, pressure plate, and clutch for this enigne?
Helf me break away from the rotary!
Thanks, Cory
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-22-2004 02:42 PM #2
Yes that is true It takes a big block tranny. C-6 are the best.
~ Vara ~
PS Junk yard should have plenty of the other stuff you need.
-
08-22-2004 04:28 PM #3
I'm looking for a manual tranny. My #1 choice is a top loader, but they're rare, and even rarer for a big block.
Does anyone know of any other tough manual tranmissions that will fit this motor?
Also, is the 351M a good motor?
-
08-22-2004 05:15 PM #4
Hey 27, do a google search, punch in Ford toploader transmissions, lots of sites will come up......Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project