Specialty tools....What's in your garage?

Heres what I have in my super sweet palace of a garage and dont laugh its all paid for :LOL:
-a broken hammer
-a socket set with some sockets missing
-crapy engine hoist
-cheap sawsall
-a stupid jack that slowly comes down wile it sits holding your car up
-shitty corless drill
-crapy angle grinder
-worn out sanding block
-a paint gun thats broken so only I now how to use it rite
-a small 30yearold compeser that dosent hold air properly
-a broken vice that I welded back to gether
-an old peace of junk stick welder from the rail road my uncle gave me
-and the basic hand tools except worn out or broken
and sill theres nothing I have found I cant do and my truck is almost drive able I dont know how long it will stay together but the point is Is Im happy with it right:LOL: :LOL: :LOL: :LOL:
(in my dreams) could some one lend me about $20 000 :D

Quote:

---

-a socket set with some sockets missing

---

Hey bro dont feel bad my tools were araised at so much the Army wouldnt ship them acroos the street, and I'm missing Sockets.

The thang that matters is that there all paid for right.

My wife almost killed me one day when she found out I was paying Snap-On $200 a week for 6 months and still owed my two kids:LOL: :LOL:

Otto
BTW I got that bill paid off.

[QUOTE]Originally posted by Streets
[B]Partial listing ProZ.. :LOL::LOL:

See, didn't I tell ya.

Well here's what I found out there :D

Hobart handler 120
Lincoln Inverter Tig (that I don't know how to use I bought it cheap)
Lincoln 225
Cutmaster 38 Plasma Cutter
Drill Press
Band Saw
Belt/Disk sander
Solvent Tank
Drill Doctor (Now I finely have sharp bits)
Bead Roller (I'm still learning to use)
30" Sheetmetal Brake
60gal 7hp comp
20gal 5hp comp portable
14" Chop Saw
Oxy/Acet setup
Blasting Cabinet
Spot Welder (Panel spot and Pinch)
Spot Blaster
Assorted Air Wrenches Grinders & Sanders
110/220v ac Generator
Powder Coating set up
HVLP and Sharp Paint guns
19" TV on Dish (a real progress killer!!!!) should have stuck to the stereo

Now if I would just get out there and use some of this stuff I'd get that project done

MM64 :cool:

Well i cant even hold a candle to streets list;) but i get by with some of my spec. tools pretty well. heres a quick list:

"use" of the miller TIG 351 syncrowave at work "when no ones around" HEHEHE!

In my garage:

Miller 130AMP MIG welder
oxy/act torches
10 hp generator
tubeing notcher
engine hoist
engine stand
40 gal compressor
many air tools
many electric tools

The mac daddy of all tools THE SAWSALL!!:LOL: has to be one of the greatest tools ever made;) give me a sawsall and a welder and get outs my way:3dSMILE:

Hey Streets ya hireing Bro???

I'll bring my own tools and ya wont have ta hold my hand at all like most new guys:LOL: :LOL:

I'm still working on pplaying nice with othes thoe:LOL:

Otto

I have no garage at the house I live in and all I got is a 140 peice Task Force mechanics set.

My dad bought mine for me at christmas. I think that craftsman made them cause they look exzactly like a craftsman tool only they say task force. I got metrics sockets up to 32 millameter and some larger standard sockets but I can't remember how big those go. I also got allan wrenches that are labled with a C-V like it says CV 3/16 or any other size that it is. I got wrenches and 3 rachets, I call them Small, Medium and large cause I can't remember the sizing on rachets.

Quote:

---

Originally posted by Streets
Hehehe LJ yer funny... You'd start at the bottom like everyone else did then? Work responsibilities: Once a day you have to take the long handled socket wrench and 1/4 turn all the engines in the shop storage unit, sweep the floor everynight, wet mop it, then spray buff the traffic lanes, take out the trash, clean the windows, (No streaks) wash the walls once a week, strip and wax the floors every 4 weeks, clean the floor, walls, countertops, coffee pots, sink, dishes, tables, chairs, Etc. in the employee "lounge" area, be there to lift and help with anything the guys need ya for, run for lunch, run for parts, run for coffee/tea, run for tools, make sure the coffee pot is always full, go outside and put another log on the fire so the Sassafrass Tea is always hot, also make sure that there is a hunk of Sassafrass in the poit with the water.. Check to see that all tools are returned and cleaned everyday. Log the broken tools in, answer the phone in a polite manor even if yer po'ed at someone or thing, be the brunt of all the practical jokes the guys will play on ya and laugh it off all the time. Always wear your Clean and pressed work uniform with the name "STREETS GOPHER" on the back of it everyday to "work"....Be the 1st one there in the morning and the 2nd last one to leave at night... AND.... ALWAYS idle (650 rpm's in drive) yer car up and down the driveway when coming to work and going home.. ALL this for at least 6 months at my minimum wage of $5.35@hr.... hehehe
When would you like to start??

---

Where do you find Sassafrass Tea?? Don't tell me it's from a Sassafrass Tree!!! I'd like some, but not if I gotta do all that stuff ta get it! HEHEHE
:LOL:

Sounds more like a "work release" program to me :whacked: ...:LOL:

Quote:

---

Originally posted by Streets
OK, IT'S NOT from a Sassafrass tree.. its from a Maple tree but it LOOKS and TASTES just like a SASSAFRASS TREE cuz it really iz one.. but ya don't want me to tell ya that so just ferget I said SASSAFRASS TREE! :p :D :LOL: :whacked: :) ;)

---

ferget wat' ?????? :confused:

Quote:

---

answer the phone in a polite manor even if yer po'ed at someone or thing,

---

See I was in until ya said that:LOL:

Quote:

---

ALWAYS idle (650 rpm's in drive) yer car up and down the driveway when coming to work and going home..

---

Sorry cannt do that Either to big a Cam

Quote:

---

Always wear your Clean and pressed work uniform with the name "STREETS GOPHER"

---

Can I have one even if I dont work for ya?:LOL:

Quote:

---

be the brunt of all the practical jokes the guys will play on ya and laugh it off all the time

---

Come on Bro I'm an Army wrench if theres one thing I know how to do its turn a Joke around on the Guy pulling it

Ya know I say I'll go back to jail and get out of the Army that way
I'll start in, say, 5 to 10:LOL:


Otto