Thread: Everybody that is currently building a car...

Tweet

Originally Posted by pro70z28

Thought I'd dust off the "Z" and work on it a little this weekend.
I didn't get it dusted off, I didn't get any work done on the "Z" either , bit I did get these stands built.
I haven't had a free weekend for months, but this weekend I had some time so I started to assemble the car stands I've been cutting out a little here & a little there.
I welded til noon, then cut down some trees & hung a door for Jenni & J.D. then came back and worked on the stands some more.
This afternoon I finished them up & jacked up the "Z". Made some adjusters out of 3/4'' bolts, so I can level them. I wanted to mark them so I could set the stand back on the floor in the same spot each time & have them be level, so I made some decals to keep them in the right locations. Also, the stand decks are 15''x15'' , just the right size for the scales, so I can weigh it on the stands if I get the urge. It's no hoist, but it should make working on the "Z" a little more convenient.

They are a neat set of stands Pro,,what height are they?They look the same as the top ..15 inches in height too?? I need to build a set like that to put under the Customline..

They are 18'' tall, 20'' when I have it on the scales.