Results 1 to 9 of 9
LinkBack URL
About LinkBacksThreaded View
-
05-20-2004 08:57 AM #9
CHR Member
- Join Date
- Apr 2004
- Location
- c
- Car Year, Make, Model: 55 belair, 93 lightning, 04 texaschopper
- Posts
- 15
I've put a tremec into a 65 Mustang. I used a pro 5.0 shiter base and got a 60's model Camero hurst shifter handle and put that on to get the proper location for the driver. The Tremec comes with a fair shifter base but the throw is very large the pro 5.0 closes that up some. The bolt pattern is the same as most hurst shifter handle I've seen. They will bolt up fine. I used a T-5 and a 3550 in the mustang and in my 93 Cobra I used a TKO. If you use one of these be sure to go to the Chevy dealer to get the proper fluid to put in it. It uses syncromesh fluid for the friction clutches and it makes the trans shift alot smoother. A nother thing the tremec makes alot of noise when it's cold.
Good luck
If you need any part #'s I used I will get them for you.Last edited by 93_406cobra; 05-20-2004 at 09:00 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!