Dad & I are rebuilding a chevy 283, needed to know if the holes on bearings go up (same side as Pistons) then the 2 hole bearing is the #1 correct. Do all holes face in the upward position or does each one sit in different position.
Printable View
Dad & I are rebuilding a chevy 283, needed to know if the holes on bearings go up (same side as Pistons) then the 2 hole bearing is the #1 correct. Do all holes face in the upward position or does each one sit in different position.
So no serious answers to my questions.
Be patient.
Weekends bring quicker answers.
Welcome to CHR. Glad to have you here, but three minutes and you're complaining about no answer? :HMMM: It's a forum, where people wander in and out, some only checking in occasionally. Plus it's gettin' a bit late on the right coast. ;)Quote:
Originally Posted by travaw
Check this tech bulletin - http://www.mellingdurabond.com/Porta...20Bulletin.pdf
That's a neat bulletin, Glenn. Looks like Travaw joined and posted his question, waited three minutes for an answer and logged off. Maybe they were right at the point of putting the bearings in, and expected someone to be monitoring the forum and providing instant answers.Quote:
Originally Posted by glennsexton