Thread: 34 going up on jack stands for a while

Tweet

I'll do that, Don. Thanks for the tip. I did have it set on a machine before I put it up on the jack stands, and haven't driven at all since then.

Caster = +5.7* (Pete & Jake's spec +5.0*)
Toe = +0.16" (Pete & Jakes spec +0.125")
Camber = -0.7*

The steering wheel feels overly tight when the box is centered, and I have some play in the steering that I don't like. I just need to go through the whole steering setup front to back to see if I've forgotten to tighten something.

Originally Posted by Henry Rifle

I'll do that, Don. Thanks for the tip. I did have it set on a machine before I put it up on the jack stands, and haven't driven at all since then.

Caster = +5.7* (Pete & Jake's spec +5.0*)
Toe = +0.16" (Pete & Jakes spec +0.125")
Camber = -0.7*

The steering wheel feels overly tight when the box is centered, and I have some play in the steering that I don't like. I just need to go through the whole steering setup front to back to see if I've forgotten to tighten something.

Jack, my Vega box has some free play at the center, too, so I'll be interested in what you find. With a 13" wheel I've got about 3"-3.5" of "slop" at the center point.