Thread: Hydralic clutch for 65 Chevelle
-
07-26-2012 01:23 PM #1
Hydralic clutch for 65 Chevelle
I put a 6 speed in my 65 chevelle(it had a auto) problem is it has those electo hydralic brakes like hydro boost except the pump is electric and remote mounted. My problem is there is not enough room becide the master cylinder for the cluch cylinder and everybody I fide uses a short stroke 3/4 inch cylinder for the clutch what I need is a long stroke 7/16 or so cluthch master to keep it from being so hard to push and such a short release motion any ideas. I bought this as a "complete kit" LOL for this car and it has been a nightmare I now know why my 64 and 32 both have autos.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-26-2012 04:33 PM #2
I'm sure you know that you can purchase every piece of the mechanical clutch linkage from the aftermarket, brand new. Throw that hydraulic mess over the fence and go simple.PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project