Thread: Looking picture of Front Spreader bar MOUNTED on a '34 Ford

Tweet

Originally Posted by rspears

Here's a picture of what 34_40 is talking about - the bar has a threaded bung in each end to accept a retainer bolt and there's the flat bar that extends back about 5" into the rail and takes smaller through bolts to keep it aligned. Those back bolts are not in place in this photo, and I ended up not being able to use this bar as I put more tilt into the grill so I boxed the rails not too long after this photo was taken. Is this what you're looking for?

How does the stock grill fit with the V bar? does it sit ontop of or behind it?
TY for pic!

Originally Posted by btsave

How does the stock grill fit with the V bar? does it sit ontop of or behind it?
TY for pic!

It fits behind it, protecting the bottom of the grill. Here's a picture of mine before I laid it back to fit the hood. This fit is probably laid back an inch or two at the top, but I think it is not too far from a stock profile. on the grill/splash aprons.

Originally Posted by rspears

It fits behind it, protecting the bottom of the grill. Here's a picture of mine before I laid it back to fit the hood. This fit is probably laid back an inch or two at the top, but I think it is not too far from a stock profile. on the grill/splash aprons.

PERFECT, that was the look I wanted! Will order one now! TY again, all!

Bart

Originally Posted by btsave

PERFECT, that was the look I wanted! Will order one now! TY again, all!

Bart

Bart, Roger said he wasn't able to use his after he moved his radiator back, instead of ordering one why don't you see if Roger will sell you the one he's not using? Just a thought.

Mike