Thread: One Way To Build A Hot Rod Lincoln

Tweet

You definitly won't like my T project then

Originally Posted by ojh

Interesting attention to the bones. Seems like an overly complicated part bolted to an assembly that finds beauty in simplicity.
I admire your fabrication skill, thought and attention to detail but i have an area under my bench where things i have made accumulate dust because they didn't pass the simplicity test. I find thta overly complicated is when vanity overrides the engineer in us, thta little guy sitting on your shoulder is whispering in your ear. Hard not to listen to him. Whom do you think Doane Spenser listened to?

What one person sees as "complicated" another sees as "perfection".

Don

Originally Posted by Itoldyouso

What one person sees as "complicated" another sees as "perfection".

Don

How true Don

Originally Posted by Itoldyouso

What one person sees as "complicated" another sees as "perfection".

Don

So.........when my bride says dealing with me is complicated she really means I'm perfect? I'll be sure to tell her YOU said that!!

I like it - just wish I had enough tools to do some of the "complications" that folks like Ken and Steve can with SS as well as common steel.

T-buckets!! Love 'em. A study in simplicity until you get creative: http://www.google.com/images?q=t+buc...w=1677&bih=746

Thanks you guys I really appreciate the comments.
This thing with the lightning holes came about when I was figuring out what I was going to do for the infra structure inside the frame rails to strengthen the frame up. I already made up my mind that any lightning hole I made I wanted some big radius' on them, not just welding in the tubing and putting a small radius from the weld. Not that there is anything wrong with that. It's a lot of work and I think it makes a part look real nice. I just want some big ones on this car. I have been playing with the idea of making some tooling I could slip inside of the different size material I'm using but it would take so may dies it would take forever. I have dimple dies but again they wouldn't work on say a piece of 2 X 3, you could get one side dimpled but not the other. Then I thought of just taking some 1/8" sheet metal and braking one side 90 degrees. With the pieces bent like that I could dimple both pieces then weld them together and I would have a piece of 2 X 3 with big radiuses. I gave up on that when I had flash backs on welding the stainless frame together, so that was out. That's how I came up with the idea of just machining the whole thing, drill an oversize hole and slip the machined piece in and weld around the hole and it's done.
Ken

Ken i wouldn't want to do this again i had to machine up some of the tubes in mine, it seemed to take forever to get them finished

That looks really nice, some times I think I should take up knitting

Originally Posted by roadster32

You definitly won't like my T project then

A 'T' project? Those things are the next evolution up from having a tiller for steering! How do you handle that or is it on the wrong side too? The 't' is a study of simplicity, Henry would not use 4 bolts if he could get by with three, the packing crates from parts suppliers became the floor boards, a forged steel clevis was replaced with a bent piece of wire for the ignition advance and a farmer was the consultant for expert mechanical shop repairs!

Just having fun Roadster, i'm sure i'd love your tee.