http://i12.photobucket.com/albums/a2...sssections.jpg

I just covered some cross sections with chicken wire on a 1X2 frame that was attached to 2X4s. To that I allpied about three layers of glas amd filled with gelcoat for a mold.
Side pieces used braked aluminum for a mold.
Nose cone mold was chicken wire/foam urethane insulation with fiberglass applied for a mold.

Silicone spray lube worked for release lube for me, buy any handling will mess up later painting. Even the lightest of silicone from your hands will contaminate.