Thread: Streetwerkz 30 sedan build

Tweet

I have had ZERO spare time these past few months... which SUCKS!!!

A small update

I finally got some good info on measurements for the sub frame so I could put the bottom of the car together.
Once I triple checked all my measurements for accuracy, and square I started on my mounting system for the body to the frame.

After the 5" channel in the front, factory mount on the rear the rake of the body should look good. I had a client of mine who does first quality steel cabinet, counter top, etc werk bend me up some 14 ga as a "C" channel with the rake cut out of one leg to match the body rake. Then I cut out another strip of 14 ga to match the shape of the sub rails to box the under side of the body, and give it a nice clean look underneath.

first pic is top view of the sub frame mount sitting on the frame, almost don't see it

second is a bottom view showing the gap that was filled

third is a view from the opposite side showing how I need to do a little more werk to finish making this strong, then look good