I reconfigured the transition from the doors to the cowl so they line up better. It was a lot of work because there are no straight edges and it's hard to block sand. I also filled in the holes I had made for the inside door handles since they didn't work very good and I have a different idea for the interior door handles.








I also finished off the rear of the doors a little different so there is a smoother thansition from the door to the jamb.









Since the top of the doors and the cowl didn't line up very well, I had to reform that area too.






I've spent a lot of time on the hood reinforcing it and making it work with the firewall mounted hinges. The unerside took a bit of smoothing because of that.