Thread: My From-Scratch project

Tweet

Sam, Quite a project so far,that thing will be HUUUUUUUUGE!. I know your far from finnished with your suspension but using a 4 link on the front with a straight axle (especially with coils)you will need a panhard bar to complete the front suspension.If not, the thing will be all over the place.

Originally Posted by ponchotom89

Sam, Quite a project so far,that thing will be HUUUUUUUUGE!. I know your far from finnished with your suspension but using a 4 link on the front with a straight axle (especially with coils)you will need a panhard bar to complete the front suspension.If not, the thing will be all over the place.

Thank for the suggestion. I was thinking that too, but I wasnt sure. I think I'll put one on there. I might change those coil springs to heavier ones too. These are only 750lbs each, so 1500 for the front and 1500 for the rear. and I know the engine I have will be pretty heavy... a 360FE that I want to change the crank and rods to make a 390FE. As for it being huge, I need alot of legroom.....(belly room too)....I'm a little over 6 feet tall and 300lbs, so a t-bucket is a little cramped for me...lol
sam