Results 1 to 15 of 187
LinkBack URL
About LinkBacksThreaded View
-
12-14-2008 08:27 AM #11
CHR Member
- Join Date
- Mar 2008
- Location
- Osceola
- Car Year, Make, Model: 30 Model A Rat Rod on Bags
- Posts
- 119
Radiator work-moving bottom hose fitting
I needed to move the lower radiator fitting ...current location would run the hose into the airbag....
I used a propane torch to remove the fitting, and then hammered it to fit the radiator so the gaps are small ...(like solder sweating copper pipe)..I cleaned it REALLY good and used plenty of flux....then soldered the fitting into the MIDDLE of the radiator. it worked great. I just found an old radiator in a friends scrap pile that i cut a piece of brass for a patch for the old location.
The lower hose will now run directly between the airbags and into the water pump.
Jeff
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!