Update: I called the guys at ECI Components, I bought my disc coversion set up from them, man were they helpfull. Mark mocked up a set of Fat man drop spindles on their set-up for me just to make sure everything would work or if I needed a caliper spacer. then I called Fat man for the spindles, they made a set just for the ECI brackets and there ya go. Two differant companies working togather and both were as cool as could be. Now I'm going to make a oil pan deflector shield to bolt in front. Aired out the oil pan will be 1" from hitting, aired up it will be about 4" and from looking at few other rods, thats about an inch higher than theirs. My nose will sit aired out at about 3" and at 6" driving.....Hopefully!!!