Front susp. is based on B-body spindles w/ a c4 Corvette rack doing the turning chores.
Set up for qa1 coil overs on all 4 corners.
Rear suspension is a version of a 4 link w/ PHB.
This one uses all teflon lined heim joints or spherical bearings except at the lower a-arms which use Moly impregnated nylon bushings.
All this is mounted to a chassis that is a 'bolt-in' for 64-67 A-bodies and except for the rear housing,spindles,rack and sway bar is all designed and built by me.

Doug