Thread: One way to build a '32 sedan

Tweet

wingman9- Nice car, do you go to any of the local shows?

I got to spend a little time on the sedan, I wanted to get some more of the strength back in the body after removing all the wood. I used 1"x 2" .065 rectangular tubing to tie the A pillar to the B pillar, then 1 1/2"x3/4x.065 that slips inside the 1"x2" from the B pillar down to the wheel well tub.
I don't have a rectangular tubing bender so I made 9 pie cut slits in the tubing then bent it 90 degrees to form it, then welded up the cuts. made some 3/16" bungs and welded them inside the tubing so I could mount the panel for the window regulators.
starting on filling the roof next week.
Ken