Thread: Polishing aluminum - again.
Results 1 to 8 of 8
LinkBack URL
About LinkBacksThreaded View
-
06-01-2007 06:02 PM #3
CHR Member
- Join Date
- Aug 2003
- Location
- CC
- Car Year, Make, Model: 70 Camaro Z-28 Now/40 Chevy Back Then
- Posts
- 4,306
It goes fairly fast. At least faster than you might think. I polished everything here, the center section was a cast pc. that had to be sanded & then polished. Diid most of the sanding with a D.A. Some parts made on the lathe got polished while still in the chuck and the CNC parts I polished by using rubbing compound and a cheap pair of work gloves."PLAN" your life like you will live to 120.
"LIVE" your life like you could die tomorrow.
John 3:16
>>>>>>
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!