new build thread

[Itoldyouso]

Ok AK, I measured the backside of the '35 rim for you. The area indicated by the arrows in your picture is about 10 and 1/8 inch across, and 2 inches deep. It tapers, so the 10 1/8 is at the top of the rim (bakcside actually)

Hope this helps you out.


Don

[Angelking]

It appears it will work. I just spoke with the guy at the website for wheel kid and he says it should be no problem making an adapter for the wires on my Pinto hubs.

Thanks for your help!


Ak