Another build thread? Yep, my track-style T

[J. Robinson]

Thanks for the encouraging words, fellers...
OK, I've skipped ahead a bit. I cut and hole-sawed the "log" part of the manifold, cut the tubes, and welded it together. I didn't think I needed to do a step-by-step on that part since I already did it when I built the first manifold. Next part is to finish cutting out the carburetor mounting plate and fit it to the log. In the first pic it is obvious that the bore spread is wider than the 3 inch tubing. Solution: cut the top and side out of the log and fit a piece to widen the necessary area, pic 2.