Thanks, Don. He's had the tri-power on there since day one. All the plumbing on it, as you can see, is done in copper and brass which he polished to a brilliant shine. He says he's going to put copper tubing in place of the radiator hoses and polish that too. We'll see... Those carbs are not the usual 2G's with side inlets; they are the more common (and much less expensive) front inlet type. The adapter that they sit on turns them slightly so the inlets are offset to allow the plumbing to fit. That setup draws a lot of attention.

The New Smyrna cruise-in takes place the second Saturday of every month and always draws a large number of nice cars.

The week after these pics were taken, we headed north to attend the cruise-in at Rossmeyer's in Ormond Beach. Unfortunately, about ten miles from home, my son's sedan threw its right rear wheel! I went back home to get my truck, a jack, and the necessary parts and tools so we could affect repairs on the roadside. No real damage other than 5 broken lug studs and a beat up brake drum, but my son learned a valuable lesson about wheel spacer adapters and why we use a torque wrench to install them...