Don

Thanks for the kind words.

I studied a lot of cars on the web and at shows trying to figure out the stance. Even then I had to change a few things about halfway to this point to get it right. My wife says I spend more time looking at it than working on it. But, I'm no artist so I have to build it to see what it's going to look like.

I wish I had taken more pictures while I was building. But. if anyone has any questions I'll try to answer them. I'll try to take more pics in the future.

Here is some more info.

The frame is 2" x 3" x .120 wall tubing. It has a 60 degree kickup in back with 6" rise. The wheelbase is right at 105".

The body is by Russnomore streetrods here in Luziana. They're only about 2 hours from my house. It came with a fiberglass floor, seat insert, pass. door and hinges and a cut down 32 dash. The body has the back cut out in the bed area so that the seats can be moved back. You sit down in this body instead of up high. I had to modify the floor because I raised the trans up higher than they intended. I'm going to add some more bracing too. I'll post pics of the floor mods when I can.

Mike