37 Ford build--IE: old Header issues thread /37 Ford/5.0/GT40P heads

[randyr]

Randy had to go way back in the pages to find the pedal thread you did . Once the car comes back I would like to have a little idea and remember how you converted it over .

I will be watching for a good deal on a power set up soon .
.

Sure, Bobby, I'm happy to help however I can. In retrospect, there may be an easier way than what I did but I was trying to use parts I had already bought. I had the car set up for a C4 trans so my MC/power booster setup only had one pedal. Obviously, converting to a 5 speed, I needed two! After looking at the pics of your existing pedals on your 37 plus a new clutch pedal setup from Pete & Jakes http://www.peteandjakes.com/blog/index.html, I devised a way to modify one pedal setup into two.
Are you going to keep the original X-member in the frame or do you have plans to make some big changes to it? That will make a big difference for how you approach the pedals....

[bluestang67]

Sure, Bobby, I'm happy to help however I can. In retrospect, there may be an easier way than what I did but I was trying to use parts I had already bought. I had the car set up for a C4 trans so my MC/power booster setup only had one pedal. Obviously, converting to a 5 speed, I needed two! After looking at the pics of your existing pedals on your 37 plus a new clutch pedal setup from Pete & Jakes http://www.peteandjakes.com/blog/index.html, I devised a way to modify one pedal setup into two.
Are you going to keep the original X-member in the frame or do you have plans to make some big changes to it? That will make a big difference for how you approach the pedals....

Randy I am keeping the X member . I looked at the pedal assy today too and they almost look identical to yours I think I can mod its mount with a power booster assy and mount . . I will have to weld different bungs on it to accommodate the M/C and clutch cable . I will have to figure it out more again once its back . I will have a few pics to add in a short .