Thanks guys, I with you did`nt want to cut it up, heck, I never cut the fire wall, I did it the hard way.. it took me a week to build a lower alt mount to put it on the lower left side, nothing premade (store bought) would fit or couldn`t adjust. so started with steel plate for the base to bolt up to the lower two bolt bosses, and started tacking up steel scrap until I got the desired position and adjustment, then pulled it off for measurements and cut one from 3/8 aluminum stock with a saber saw, then polished. Now its way down almost out of site. The guys at Vintage Ford said it couldn`t be done with a stock frame, until I showed up at one of thier shows.