Thread: Lowering the rear of a 50?
Results 1 to 2 of 2
LinkBack URL
About LinkBacks-
01-05-2005 07:45 PM #1
CHR Member
- Join Date
- Dec 2004
- Location
- Burkburnett
- Car Year, Make, Model: 23 Dodge roadster, 50 Pontiac
- Posts
- 26
Lowering the rear of a 50?
I want to lower the rear of my 1950 Pontiac Chieftian 3 -4 in. How do I go about this. I know the best way is lowering blocks " I guess" but on my rear end it looks like leaf springs, but they seem to be incased in a metal sleave??
Last edited by WoodyWood; 01-05-2005 at 08:30 PM.
Freedom isnt Free
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-06-2005 09:33 AM #2
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,898
Re: Lowering the rear of a 50?
Not necessarily "the best", but satisfactory for a "quick & dirty". The lowering block goes between the spring and the spring mounting pad on the axle housing, so the matter of the springs having the "dust shields" is inconsequential. 4" is quite a bit for a block and much more prone to bottoming out, you might want to settle for 2 or 3 at most. If you buy a kit it should come with the longer U bolts necessary as well.Originally posted by WoodyWood
I know the best way is lowering blocks " I guess" [/IMG]Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! As his service was starting I couldn't figure out what the music was, heavy on a flute in a jaunty...
John Norton aka johnboy