Don, are you letting the supplier erect the red iron and put up tin, or are you doing that yourself? I had not realized your new addition was deeper than the original building - it's indeed going to be a nice shop.
Printable View
Don, are you letting the supplier erect the red iron and put up tin, or are you doing that yourself? I had not realized your new addition was deeper than the original building - it's indeed going to be a nice shop.
With the iron up, it seems so much bigger than I thought it would be. I will be nice to work in.
Got all the red iron welded up (finally)Started to hang the sheeting.
Lookin' good, Don! I did my wood structure barn about nine years back - lots of screws!! Ya' got any help holding tin, or you winging it alone?
Doin the sides myself, got a couple buddies comin over tomorrow to help put the lid on.
Back lid sheets are 26 ft long.
Little ruff for 1 guy.
Don, How are you going to insulate it?
You got that right! Especially if there's any breeze at all, and it doesn't take much to turn a piece of tin that size into a sail! How about insulation? I used a bubble wrap with foil one side, white the other for the roof panels, but have never done my walls. What are you using?
After all the interior walls (Booth,sh*tter, and air compressor room)
and rough out electrical is done, spray foam insulation 6" thick on everything.
Then combonation, white tin and dryall entire inside.
Will also install a 5 ton heat pump for a/c and heat.
HAHAHA I cant help it thats funny right there.
Got all the outer tin finished today, now on to the inside.
Looking' great Don! Going to have lots of nice room when the inside is complete! I'm sooooooo jealous......
it dont matter how big he builds it dave. at night that stuff in there mates. don will have it full in no time :)