Learned a new trick today---

Hot Damn---I learned something new today!!! I had to slip across town to see a customer (well actually, it was so nice I wanted to get out for a drive in the roadster). While I was down in the south end, I decided to stop at BusyBee and buy a knurling tool, as they are on sale. I believe that I only tried knurling once before, in grade 9 machine shop, and it was a disaster. ---Anyways, I paid $25 for the knurling tool, and did a big search on my machining websites to gather information on how to use it. I had a 2" length of 1" diameter aluminum scrap, so I chucked it up and ---Voila---It worked like a charm.
My real motivation was to be able to make nice, machined aluminum peices with a 1/4-20 thread in the center and a knurled outer diameter to hold the new Lexan windows into the hotrod.
http://i307.photobucket.com/albums/n...NURLING001.jpg

i use my knurler some it s fun . i use it when making a no slip part. make sure you use oil on the knurler wheels and keep part s clean as well as roller .the out side of the stock should be smooth or it will show thru the knurl .i like knuling i use it alot when i built my honing machine i built the big hand nuts with the big hex nuts cut on the top of the round stock to the right of the block

Hey Pat, I know I am new here, but I have to ask, do you ever use capitals or periods? You have some very interesting things to say, but it takes me forever to figure it out. No offense meant. Edd

Quote:

---

Originally Posted by uppster

Hey Pat, I know I am new here, but I have to ask, do you ever use capitals or periods? You have some very interesting things to say, but it takes me forever to figure it out. No offense meant. Edd

---

NO... i Do NOT.

Pat is a very smart fellow around all things mechanical. It takes a bit of effort to read his posts, but look for the wisdom in his answers, not the structure of his prose.:3dSMILE::3dSMILE:

Quote:

---

Originally Posted by brianrupnow

Pat is a very smart fellow around all things mechanical. It takes a bit of effort to read his posts, but look for the wisdom in his answers, not the structure of his prose.:3dSMILE::3dSMILE:

---

THANK YOU VERY MUCH . i started posting on here to help with my bad spelling. some thing i have work on for over 35 years on this earth . but thank god i never had to spell out to my hand s what i could do with them

I hope you saw, no offense meant. Edd

Quote:

---

Originally Posted by uppster

I hope you saw, no offense meant. Edd

---

This post is not about me . You posted some thing that must of made you feel better. Then say no offense meant :3dSMILE: So you think someone thats not good at spelling must have a low IQ .Do not take this the wrong way but i think you must a be a fool to post something like Take no offense . That would give you a pass thinking you would get a rise out of me try harder:D

No No No that is not it at all. I do not cause trouble. I appologize.

It's just like in the movie "Coolhand Luke", "What we have here is a failure to commumicate!" :cool:

My old brain must be really fast. I not only understood what you wrote, but knew your point before I was finished reading.:eek::LOL:

If you have been around a 3 year old long enough you can read and understand just about anything.:LOL::LOL:

And if you want an even greater education, just hang around some teenage texters.:whacked::whacked::LOL:

That made my eyes feel weird.

And, as a finishing shot, here are the knurled knobs installed, as seen from inside the car, and from outside when the windows are not in place.
http://i307.photobucket.com/albums/n...EDKNOBS001.jpg
http://i307.photobucket.com/albums/n...EDKNOBS003.jpg

Very nice touch Brian!! and good job all around on the widows.

Nice job!! Always remember to keep the job awash with fluid, water is OK as it stops the bits getting caught up.

Have the knobs clear anodised to stop them discoloring or corroding.

when working with alum or steel on the lathe or mill i have used engine oil cut with mineral spirts keeps things from sticking . i use a small acid bush or spray bottle. add mix to work. this works good but may smoke abit .was well as some other cutting fluids . some guys use spray on furniture polish