Quote Originally Posted by Navy7797 View Post
rspears Thanks for the input ! I looked at that and when I measured the amount of rear side travel it was 7/16"and with the long bar its 1/8". This is going air ride on all corners with movement of 4" total, that's what I did the measurements from for side movement. Trying to keep bar parallel with the rear at ride height its all a pita.
Navy, how about fabricating a new "shock mount" with a ~3/8 flat plate and a 3 sided extension, maybe a chunk of 2"x1/4 wall square tube to put your third member mount higher to clear the snout, and get your panhard bar closer to level at ride height. Mount the frame end at the bottom of the C channel, welding to both bottom and side. You could even add a couple of gussets to the square tube for stiffening, or use heavy wall C channel or rectangular tube. The 2" might have to be 2.5" or 3" to clear the heim insert. Just some quick ideas....