I found a 6.0 out of a 2003 Cadillac Escalade. The engine was filthy, but when
I took the oil pan off to check it out, the bearings and cylinder walls were in good shape.
I decided to get the block hot tanked and cleaned. So I could just rebuild it. I also had the crank cleaned and polished.




The engine has a stock bottom end with with new pistons, sloppy stage 2 cam, 243 heads,
harden push rods, PAC-1219 springs, and stock rocker arms with a Trunion kit

On the top I'm using an LS6 intake manifold, Slightly Modified Stock Truck Alternator and Power
Steering Bracket, 2002 Camaro Water pump with 3/4 spacers, Idler pulley relocation bracket, and
2002 Camaro Belt Tensioner, and a Billet Fuel Rail kit. Steering Bracket, 2002 Camaro Water pump
with 3/4 spacers, Idler pulley relocation bracket, and 2002 Camaro Belt Tensioner, and a Billet Fuel Rail kit.