Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree297Likes

Thread: Grandpa’s Grand Prix
          
   
   

Reply To Thread
Page 1 of 6 1 2 3 4 5 6 LastLast
Results 1 to 15 of 90
  1. #1
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    Grandpa’s Grand Prix

     



    Hey all, haven’t been on in a while and getting ready to start a new one. The young man that plays drums in my band inherited this 77 Grand Prix when his grandpa recently passed. He’s not a car guy so he asked me if I’d help him get it roadworthy again. He doesn’t want to break the bank so we’re just going to freshen up all the mechanicals, fix the rusted out quarters, and put in some decent interior. The car hasn’t run in many years but after tinkering with it for a few hours we had it running and the engine sounds pretty good. Interesting car, it was ordered with the 403 Olds instead of the Pontiac engine options. Should be a fun project and always good to help keep a family heirloom on the road.
    1 Corinthians 1:27

  2. #2
    Mike P's Avatar
    Mike P is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2003
    Location
    SW Arizona
    Car Year, Make, Model: 57 Ply, 68 Ply Valiant, 83 El Camino
    Posts
    3,746

    Neat car. The 403 Olds was not a bad engine.....owned and worked on a few over the years it's also a drop in replacement for that horrible olds based diesel GM was fond of putting in everything. A lot of the Pontiacs that were built in and especially those sold in California had the Olds engines because the 400 Pontiacs wouldn't pass California emission standards. I've seen a fair number of Firebirds of that era with the 403s out here in AZ.

    Should be a fun car when it's done.


    .
    I've NEVER seen a car come from the factory that couldn't be improved.....

  3. #3
    rspears's Avatar
    rspears is online now CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Sep 2007
    Location
    Gardner, KS
    Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
    Posts
    10,988

    Those Grand Prix's were classy back in their time! Good for you helping the guy bring his Grandpa's back!
    Roger
    Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.

  4. #4
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Neat car! I had a '75 Gran Prix, what a road trippin' car it was! Good luck with the new project, looks like you're starting with a keeper, anyway. Helping a friend rebuild his Grandpa's car must damn near qualify you for saint hood! The last cars I remember my Grandpa's having were a '53 Studebaker my Grandpa Gunderson had, and a '56 Ford two door hardtop that Grandpa Severson had! Dang, I'd give anything to find either of them today!
    Mike P, ted dehaan, NTFDAY and 4 others like this.
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  5. #5
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    Thanks; it’s fun to do something a little different after mainly working on 40s and 50s Mopars. My wife is happy I’m building something with someone else’s money! Lol!

    We did some more tear down today; should be time to break out the power washer pretty soon and get rid of some sludge.
    Attached Images
    1 Corinthians 1:27

  6. #6
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    Nice to see you tackling a project again, I like watching how fast you get these things done!
    falconvan likes this.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  7. #7
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    Got the motor out today and will do some power washing tomorrow. Lots of mud on the frame And front suspension; I think grandpa must’ve drove a lot of dirt roads.
    Last edited by falconvan; 08-17-2020 at 06:07 PM.
    1 Corinthians 1:27

  8. #8
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    Looks much better after a good degreaser soak and power wash. Nice surprise; most of the steering linkage has been replaced and everything is tight. So we’re going to disassemble, paint, replace shocks, springs, a few rubber boots and bushings, and put it back together. And all of the brake parts, of course.
    Attached Images
    1 Corinthians 1:27

  9. #9
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    Doing a little housekeeping. Just got all new control arm bushings and brake parts delivered; as soon as we get the suspension together we’ll get the motor on a stand so we can open it up and take a look.
    Attached Images
    1 Corinthians 1:27

  10. #10
    Dave Severson is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Jul 2003
    Location
    Madison
    Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
    Posts
    21,160

    Looking good, that's some good progress! Going to be a really first rate cruiser!
    Yesterday is history, tomorrow is a mystery, Live for Today!
    Carroll Shelby

    Learning must be difficult for those who already know it all!!!!

  11. #11
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    Thanks; it’s also nice having a helper and he’s not shy about getting dirty even though he’s pretty green on mechanics.
    The front end is ready to put back together so should be hitting that over the next week. He was trying to decide what to do about interior as what’s there now is garbage from top to bottom.
    We lucked out and found this 75 Grand Prix parts car with really cool custom seats, a decent interior, good quarter panels (much needed) and a ton of other parts we can reuse.
    1 Corinthians 1:27

  12. #12
    40FordDeluxe's Avatar
    40FordDeluxe is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2011
    Location
    Prairie City
    Car Year, Make, Model: 40 Ford Deluxe, 68 Corvette, 72&76 K30
    Posts
    7,264
    Blog Entries
    1

    Awesome project you are in to Pat! Nice progress and what a cool score on that parts car!
    falconvan and 36 sedan like this.
    Ryan
    1940 Ford Deluxe Tudor 354 Hemi 46RH Electric Blue w/multi-color flames, Ford 9" Residing in multiple pieces
    1968 Corvette Coupe 5.9 Cummins Drag Car 11.43@130mph No stall leaving the line with 1250 rpm's and poor 2.2 60'
    1972 Chevy K30 Longhorn P-pumped 24v Compound Turbos 47RH Just another money pit
    1971 Camaro RS 5.3 BTR Stage 3 cam, SuperT10
    Tire Sizes

  13. #13
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    We tore the motor down today, no big surprises. It was rebuilt at some point as it had a 20/20 crank. Cylinders and bearings look good so we’re just going to change all the seals and gaskets, put in an aftermarket cam and lifters, plus a new oil pump for good measure.
    Attached Images
    1 Corinthians 1:27

  14. #14
    53 Chevy5's Avatar
    53 Chevy5 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2005
    Location
    Doon, Ia
    Car Year, Make, Model: 53 Chevy 3100
    Posts
    2,708

    Nice score in the parts Grand Prix, that interior stuff can get out of hand in a hurry. You and I would get along good with the mechanic side of some things. Sometimes it's not worth putting a crazy lot of parts money and extra work into something that won't get 5,000 mi a year put on it.
    Seth

    God cannot give us a happiness and peace apart from Himself, because it is not there. There is no such thing. C.S.Lewis

  15. #15
    falconvan's Avatar
    falconvan is offline CHR Member Visit my Photo Gallery
    Join Date
    Mar 2007
    Location
    festus
    Car Year, Make, Model: 48 Plymouth, 48,54 Heap
    Posts
    3,407

    Yeah, I’ve really gotten away from dumping loads of money in a drivetrain. As I get older I find I’m just as happy with a good running stock engine in a project.
    Mike P, ted dehaan, NTFDAY and 1 others like this.
    1 Corinthians 1:27

Reply To Thread
Page 1 of 6 1 2 3 4 5 6 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink