Thread: 1955 Crown Vic Build

Tweet

Wow that's a lot of cutting. Where are you getting the replacement parts? Shop built or a donor?

I had considered doing a mod motor for a short time. But it just gets to expensive and no real net gain for what I was after.

Originally Posted by 34_40

Wow that's a lot of cutting. Where are you getting the replacement parts? Shop built or a donor?

I had considered doing a mod motor for a short time. But it just gets to expensive and no real net gain for what I was after.

Previously order left front floor pan, toe board and floor outer braces also left quarter partials. The rest is going to be made the repo rocker panels are not nice. Would have ordered more floor pans but everything has to come from the US so I'll just make the rest. There is not much available for 55-56 fords.
The thing about a 4.6 they look good and they are a nice motor but very expensive.

Originally Posted by F-350Luoi

The thing about a 4.6 they look good and they are a nice motor but very expensive.

So very true!


Hey, in that bottom picture. It appears that the downspouts are sticking out to far. Be careful around them..8-)