I had one of those days today. Plan was to wire up dome light and put in door switches for it. Install center chrome piece in the windshield. Install horn and install drivers door window. I got the dome light wired in and then found out there is no place in my door jam that will work with the door switches. Moved on to the window. The glass setting tape I have is too wide and it distorted the bottom rail to the point where the roller would not work . Decided to glue all the door windows in instead when I get the pass bottom rail in that was back ordered. Couldn't get the windshield center strip in because the screws that came with it are too short. Moved on to the horn that came off a 90's Chevy pickup, not enough room in the place where it needs to go, I need a smaller horn. Had the hood open and realized my alt is energized with the key turned backwards to the radio only position ( thank you EZ wire ) . Closed the hood and seen that I put a subtle ripple it from working on the windshield strip that wouldn't go on. To finish off the night , I had to go to the Batman Lego movie tonight On the good side, my wife put sound mat on the back of the cab today, that went well Time for beer and ice cream.