Thread: 383 Stroker Build

Tweet

slice the clay thru the middle with an exacto or razor blade and you can see v to p clearance plus the radial clearance arount the edge of valve to notch circumference


I think some of the clays out there could bend the stems on some of these 6,7 mm stems--3/8 old school maybe not--------but I don't want to bend some $400 titanium valve

Originally Posted by jerry clayton

I think some of the clays out there could bend the stems on some of these 6,7 mm stems--3/8 old school maybe not--------but I don't want to bend some $400 titanium valve

The clay has to be worked with your hands to make it soft and conformable Jerry.

.