1LikesThread: 1929 Ford Model A Coupe Build
Results 1 to 15 of 22
LinkBack URL
About LinkBacksHybrid View
-
03-26-2015 09:33 AM #1
CHR Member
- Join Date
- Feb 2006
- Location
- Bartlett
- Posts
- 6,831
Check frame specs at Wescottsauto.com
Tech section has detailed drawings of frames--------
-
03-26-2015 10:21 AM #2
CHR Member
- Join Date
- Dec 2014
- Location
- Suwanee
- Posts
- 27
Thanks for the link. Printed everything off and rechecked all measurements and for square. It's spot on. The only thing off is the bottom of the "C" channel. It's shorter than the top. I'm worried that when I go to box the frame, the inside is going to have a slight inward slant which could affect me later on down the line.
Originally Posted by jerry clayton
In the immortal words of Socrates..."I drank what?"
-
01-11-2016 03:25 PM #3
CHR Junior sMember
- Join Date
- Jan 2016
- Location
- J-Town
- Car Year, Make, Model: 30 Model A
- Posts
- 2
Just FYI if you're not familiar with those "banger" motors, you can get good $ for them if they run good.
Motor trans & radiator can bring you $600 to put towards your project.
DO NOT TOSS IT!
That being said, good luck with you're build, I'll be following along.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Either return this forum to what was or get the HELL OUT!
Dead!