While I was waiting for the new switches from Jegs last week I crawled under the wagon to check the switches on the trans. I noticed one of the N/S wires was pretty loose in it's connector. I moved it a bit and it feel right out. I thought I had found the problem. I put it back in the terminal and re-crimped it so it is solid and tried the ignition. The car fired right up! I thought that's what the problem was, loose connection! The car started every time I tried it from then on out. I fired it up this morning, didn't let it warm up enough, went to back out of the shop and the engine died. Hit the key to restart and nothing!!! Dead, right back to it's old tricks.
Anyway, I pushed it outside so I could work on another project. I pushed it back in this afternoon with the intentions to replace the switches. Tried to start it and it's dead. I crawled under the dash and started moving wires so I can get to the N/S switch wires. After I had those isolated I hit the starter again just for grins and the damn thing fired right up... So, now I am chasing another loose connection up in the dash. Wish me luck. I find it tomorrow night or the whole switch gets re-wired...
Mark