Thread: 55/58 Chevy truck build

Tweet

I know I'm probably asking a stupid question, but you're putting the same finish on the bottom side too, right Bam?

Originally Posted by v8nutz

That's going to look great!

Thanks man.

Originally Posted by rspears

I know I'm probably asking a stupid question, but you're putting the same finish on the bottom side too, right Bam?

There are no stupid questions except for the ones not asked. There are 5 coats on the bottom and sides and 8 on the top. I applied 5 coats first to every part of the wood. Then I blocked the top and applied 3 more.

Originally Posted by BAM55

There are no stupid questions except for the ones not asked. There are 5 coats on the bottom and sides and 8 on the top. I applied 5 coats first to every part of the wood. Then I blocked the top and applied 3 more.

I'd say you've got it covered Bam, as expected from your attention to details to date! It's amazing how many guys will spend hours making a beautiful piece of furniture, especially for outdoors, and only finish the top saying "Why would I waste finish on the part no one will see!! Then the top warps.....

Originally Posted by Firebird77clone

.....so that the stupid ones would open their mouths and reveal themselves!

I'd say that what you maybe saw as a stupid question from a stupid guy may have saved someone's life later. If the guy truly didn't know, then to him the question was important, and helped him learn. The most dangerous guys are those who don't know and try to BS their way through a problem. Your Drill Sergeant likely understood that....

HA HA Ha, Lol!

No such thing as a stupid question!

That's what my drill sergeant said, so that the stupid ones would open their mouths and reveal themselves!

Originally Posted by firebird77clone

HA HA Ha, Lol!



That's what my drill sergeant said, so that the stupid ones would open their mouths and reveal themselves!

I sincerely hope you didn't believe everything your drill sergeant told you! I'd say it's far better to ask then just blunder along and wonder what the answer to one's question is!

Well...... there are some exceptions - I always get a kick out of Dilbert as it hit so close to home for me

Originally Posted by glennsexton

Well...... there are some exceptions - I always get a kick out of Dilbert as it hit so close to home for me

I had that very strip taped to the side of my computer at work! It's a classic!

P.S. : the private asking stupid questions was ME!

I had great drill sergents, both times!

Well I got some of the wood installed, but I have to stop here until I have some of my buddies come over to help install the bed on the truck. I have access to the bolts that mount it to the frame at this point.

That looks really nice Bam! I remember we built a 54 Chevy half ton at a body shop I worked at years ago. The worst thing I hated about that truck was the way the bed attached to the truck. The bolts went through cross members we made to secure the bed to the frame. That was a normal thing. But then the owner had us put the wood floor over them and we had to clearance the wood to lay on top of the bolts. So in 5 years when the truck came back for work, we had to pull the floor to pull the bed without scratching any of it. It sure looked cool having no mounting bolts in the floor though.

.

Originally Posted by 40FordDeluxe

That looks really nice Bam! I remember we built a 54 Chevy half ton at a body shop I worked at years ago. The worst thing I hated about that truck was the way the bed attached to the truck. The bolts went through cross members we made to secure the bed to the frame. That was a normal thing. But then the owner had us put the wood floor over them and we had to clearance the wood to lay on top of the bolts. So in 5 years when the truck came back for work, we had to pull the floor to pull the bed without scratching any of it. It sure looked cool having no mounting bolts in the floor though.

.

Yeah sometimes we have to give up ease of installation for the cool factor.lol

With the help of my buddies I was able to get the bed on the truck today.

Very nice Bam!

That looks so good! Got to feel great to see it like that.

Originally Posted by 40FordDeluxe

Very nice Bam!

Thanks, its coming along.

Originally Posted by v8nutz

That looks so good! Got to feel great to see it like that.

Thanks, and yeah it feels great.