Thread: 39 Ford (Coast to Coast) Rebuild

Tweet

Originally Posted by autotec

After thinking about it, I had to agree. After 2 days of playing with 3 different racks, plus different bushings, spacers and lines, I think I found a combination that fits. (with the front sway bar)

I have yet to remake the hard lines, but it will fit. Below are the pictures. Sorry about the pictures, but it was getting late.
Attachment 60802

Glad you can make it work. I'm sure all the hard work will pay off in the end.

In the lower picture, in the upper left hand side, I notice a locknut with no bolt length coming through. Perhaps you've only fitted it for "rough-in".. or mockup... but if not it may cause an issue down the line.. just thought I'd mention it.

Originally Posted by 34_40

Glad you can make it work. I'm sure all the hard work will pay off in the end.

In the lower picture, in the upper left hand side, I notice a locknut with no bolt length coming through. Perhaps you've only fitted it for "rough-in".. or mockup... but if not it may cause an issue down the line.. just thought I'd mention it.

You guessed it right, still in mock up stage. Just making sure everything fits.