Thread: '37 Oze build

Tweet

Removed by author.

Originally Posted by daveS53

The repair process has been discussed before. See posts # 176, 262, and 264....... IMO, bondo glass filler is totally adequate for the edge repair, since the body is not lacking in strength - there's a thick layup of fiberglass in the corner area. All that's needed is rough sanding and tapering to remove all of the thick gel coat, prior to applying the filler.

Yes, you've described your "repair process" before, and we'll just agree to disagree on the value of "bondo glass filler" with it's small, random glass fibers in a low quality substrate.

I'm not sure why I came back to your thread and commented again, but I won't make the mistake again. I'll wish you best of luck on your continuing saga, and bid you adieu.